Firmware Upgrade Not able to see anything after

Experiencing technical problems? Look here for help!

Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 3:04 pm

after upgrading to V1.1.27 SEP 12 2018 i can connect to braumeister via online but does not display or allow me to do anything. it just says Connect on the screen and shows that it is connected
Attachments
braumiester2.JPG
braumiester.JPG
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Firmware Upgrade Not able to see anything after

Unread postby f00b4r » Tue Jan 01, 2019 4:50 pm

My guess is that you have not registered the new firmware on the BM itself, see:

viewtopic.php?t=3034
f00b4r
 
Posts: 134
Joined: Mon Jul 21, 2014 6:49 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 6:33 pm

You are correct f00b4r, i did not. So i did, and like the video after putting in my email i get the Ok show up and then i can not connect to it now. It shows connected on the BM but when i try to connect via the app or webpage it wont connect says it cannot find the bm
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 6:37 pm

What a pain in the ass, i did not do the email portion of activation. now says good to go
thanks again f00b4r
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby f00b4r » Tue Jan 01, 2019 6:37 pm

sgdaher wrote:What a pain in the ass, i did not do the email portion of activation. now says good to go
thanks again f00b4r


No worries, glad you got it working.
f00b4r
 
Posts: 134
Joined: Mon Jul 21, 2014 6:49 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 7:33 pm

i guess i spoke too soon, now after acknowledging email i get message device found and now cannot connect at all even though bM shows online and i can ping it from command prompt. i get a useless screen that does nothing see b3elow
Attachments
braumiester3.JPG
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 7:33 pm

i guess i spoke too soon, now after acknowledging email i get message device found and now cannot connect at all even though bM shows online and i can ping it from command prompt. i get a useless screen that does nothing see b3elow
Attachments
braumiester3.JPG
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 8:14 pm

my error when trying to access but no instructions how to correct it
Attachments
braumiester4.JPG
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby f00b4r » Tue Jan 01, 2019 8:17 pm

I would owe off the BM for a few minutes, delete the BM from MySpeidel cloud and then turn the BM back on - there seems to be some kind of clash and this might clear it.
f00b4r
 
Posts: 134
Joined: Mon Jul 21, 2014 6:49 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 8:29 pm

ok let me try that thanks
so after deleting will i have to reregister?
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby f00b4r » Tue Jan 01, 2019 8:30 pm

sgdaher wrote:ok let me try that thanks
so after deleting will i have to reregister?


Not sure, see what happens.
f00b4r
 
Posts: 134
Joined: Mon Jul 21, 2014 6:49 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 8:52 pm

i left it unplugged for 5 minutes re registerd to add it via cloud but got the same not connecting
so decided to re flash the firmware and this is what i get now just wont connect. may have to flash it back to 11.26
Attachments
braumiester5.JPG
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby f00b4r » Tue Jan 01, 2019 8:54 pm

sgdaher wrote:i left it unplugged for 5 minutes re registerd to add it via cloud but got the same not connecting
so decided to re flash the firmware and this is what i get now just wont connect. may have to flash it back to 11.26


Try asking on the Speidel Facebook page, they have a thread on the new firmware that they seem to have been pretty responsive too.
f00b4r
 
Posts: 134
Joined: Mon Jul 21, 2014 6:49 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 9:14 pm

nothing worked, flashed it back to 1.1.26 and it works fine as it did before.
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm

Re: Firmware Upgrade Not able to see anything after

Unread postby sgdaher » Tue Jan 01, 2019 9:17 pm

f00b4r wrote:Board


i could not find a thread on their site
do you have the link?
sgdaher
 
Posts: 25
Joined: Fri May 26, 2017 5:00 pm


Return to Technical Support

Who is online

Users browsing this forum: No registered users and 4 guests