Replaced the Tap

Did you pimp your Braumeister? Show us your mods!
uk_brewer
Posts: 48
Joined: Tue May 02, 2017 8:36 pm
Model: 20 litres (2015)
Location: Dundee, IL

Replaced the Tap

Unread post by uk_brewer » Sat Jun 10, 2017 1:12 pm

Replaced that awful oem valve with a spare Blichmann linear flow valve I had sitting around. Found a cheap eBay supplier for the 3/4 bspp to tri-clamp ($4.99 us, shipped).
IMG_5630.JPG
IMG_5629.JPG

User avatar
mashy
Posts: 2924
Joined: Sat Aug 29, 2015 12:43 pm
Model: 20 litres
Location: Mercia

Re: Replaced the Tap

Unread post by mashy » Mon Jun 12, 2017 7:29 am

That stands properly replaced. :D Nice

jamesmb
Posts: 20
Joined: Mon Sep 07, 2015 3:19 pm
Model: 20 litres

Re: Replaced the Tap

Unread post by jamesmb » Mon Jun 26, 2017 9:30 pm

Why the triclamp in between? I have the same tap and a hex reduction nipple. (Just not yet pieced together).
Awesome tap btw.

uk_brewer
Posts: 48
Joined: Tue May 02, 2017 8:36 pm
Model: 20 litres (2015)
Location: Dundee, IL

Re: Replaced the Tap

Unread post by uk_brewer » Tue Jun 27, 2017 5:50 pm

Two reasons

1. Unable to find a 3/4" bspp to 1/2" npt nipple
2. Allows me to easily rotate output to pump or chiller without extra elbows being required.

Post Reply