need to replace mesh filter

Did you pimp your Braumeister? Show us your mods!

Re: need to replace mesh filter

Unread postby tsgreen » Fri Nov 10, 2017 8:59 pm

My new filters came in and they are AWESOME!! Ordered them with a 348 mm diameter, nice snug fit. Thank you paulg and wobdee for your assistance, it is greatly appreciated! :beer:
Attachments
20171109_170048.jpg
User avatar
tsgreen
 
Posts: 116
Joined: Thu Sep 29, 2016 4:03 pm
Location: Iowa
Model: 50 litres

Re: need to replace mesh filter

Unread postby mashy » Sat Nov 11, 2017 6:44 am

Oo very nice. I am very tempted. Mine are getting a bit tatty round the edge.
User avatar
mashy
 
Posts: 2718
Joined: Sat Aug 29, 2015 12:43 pm
Location: Mercia
Model: 20 litres

Re: need to replace mesh filter

Unread postby PerzellBrewing » Mon Nov 13, 2017 8:59 pm

tsgreen wrote:My new filters came in and they are AWESOME!! Ordered them with a 348 mm diameter, nice snug fit. Thank you paulg and wobdee for your assistance, it is greatly appreciated! :beer:

Where did you pick those up at?
BM20 Owner in US
Twitter: @PerzellBrewing
FB: Perzell Brewing
Pinterest: PBrewing
Shop: TeePublic Storefront
User avatar
PerzellBrewing
 
Posts: 128
Joined: Wed Jan 14, 2015 2:26 pm
Location: Chattanooga, Tennessee, USA
Model: 20 litres

Re: need to replace mesh filter

Unread postby Mashman » Mon Nov 13, 2017 9:20 pm

mashy wrote:Oo very nice. I am very tempted. Mine are getting a bit tatty round the edge.


+1
Mashman
 
Posts: 118
Joined: Wed Feb 04, 2015 4:06 pm
Location: Canterbury, Kent, UK
Model: 20 litres

Re: need to replace mesh filter

Unread postby tsgreen » Mon Nov 13, 2017 9:33 pm

paulg wrote:ok so I have had a reply from
I enquired about 2 x discs 20 mesh , diameter 346mm with 17mm eyelet and 4mm wire round the outside.
here is the reply

Hi Paul,
Price will be £80 including VAT and delivery by Airmail to Greece.

as you can see it is cheaper than ebay saving the postal cost as ebay quoted 40 pound each plus post which was not quoted

you can contact them here info@inoxia.co.uk

I have ordered them


Followed paulg advice and went to 6 mm wire. I also bumped diameter to 348mm - perfect fit! Believe they were cheaper than listed here. Yep, 74 GBP - 98 USD
User avatar
tsgreen
 
Posts: 116
Joined: Thu Sep 29, 2016 4:03 pm
Location: Iowa
Model: 50 litres

Re: need to replace mesh filter

Unread postby PerzellBrewing » Mon Apr 02, 2018 3:06 pm

wobdee wrote:
IMG_20170408_195540287.jpg
IMG_20170408_195540287.jpg
Received my new discs today. Nice smooth edge, nice overall quality. I should of ordered 267mm OD instead of 266mm, it's the same exact size as the original screens. I was hoping for a little tighter fit.

What mesh value did you get? 10 or 20? How have they performed so far?
BM20 Owner in US
Twitter: @PerzellBrewing
FB: Perzell Brewing
Pinterest: PBrewing
Shop: TeePublic Storefront
User avatar
PerzellBrewing
 
Posts: 128
Joined: Wed Jan 14, 2015 2:26 pm
Location: Chattanooga, Tennessee, USA
Model: 20 litres

Re: need to replace mesh filter

Unread postby wobdee » Mon Apr 02, 2018 3:53 pm

PerzellBrewing wrote:
wobdee wrote:
IMG_20170408_195540287.jpg
IMG_20170408_195540287.jpg
Received my new discs today. Nice smooth edge, nice overall quality. I should of ordered 267mm OD instead of 266mm, it's the same exact size as the original screens. I was hoping for a little tighter fit.

What mesh value did you get? 10 or 20? How have they performed so far?


I went with the 20 mesh which I believe is the same as the original screens. They have performed great but I do wish they were a little more of a snug fit like I mentioned before. I'm not sure you should go with a finer mesh and how it would effect the flow or pump.
wobdee
 
Posts: 136
Joined: Fri Oct 16, 2015 1:11 am
Model: 20 litres

Re: need to replace mesh filter

Unread postby tsgreen » Mon Apr 02, 2018 4:08 pm

I think they work extremely well! Very little gets past. I am with wobdee, do not see a need to go any finer.
User avatar
tsgreen
 
Posts: 116
Joined: Thu Sep 29, 2016 4:03 pm
Location: Iowa
Model: 50 litres

Re: need to replace mesh filter

Unread postby PerzellBrewing » Mon Apr 02, 2018 5:28 pm

I ask because the fine mesh Bac Brewing (.9mm) have been causing wort fountains for me. They say those are the same as original BM filters. The 10 mesh is larger than the original BM holes.
BM20 Owner in US
Twitter: @PerzellBrewing
FB: Perzell Brewing
Pinterest: PBrewing
Shop: TeePublic Storefront
User avatar
PerzellBrewing
 
Posts: 128
Joined: Wed Jan 14, 2015 2:26 pm
Location: Chattanooga, Tennessee, USA
Model: 20 litres

Re: need to replace mesh filter

Unread postby tsgreen » Mon Apr 02, 2018 6:08 pm

I have not had a single fountain.
User avatar
tsgreen
 
Posts: 116
Joined: Thu Sep 29, 2016 4:03 pm
Location: Iowa
Model: 50 litres

Re: need to replace mesh filter

Unread postby PerzellBrewing » Wed Apr 11, 2018 3:03 pm

tsgreen wrote:I have not had a single fountain.


I have reached out to them 4 times and haven't gotten a response. Getting frustrated. Wonder if there is anyone here in the states that could do something similar.
BM20 Owner in US
Twitter: @PerzellBrewing
FB: Perzell Brewing
Pinterest: PBrewing
Shop: TeePublic Storefront
User avatar
PerzellBrewing
 
Posts: 128
Joined: Wed Jan 14, 2015 2:26 pm
Location: Chattanooga, Tennessee, USA
Model: 20 litres

Re: need to replace mesh filter

Unread postby tsgreen » Wed Apr 11, 2018 5:21 pm

Strange. If I remember correctly they contacted me fairly quickly. Have you looked for them on ebay? Maybe you can contact them through there.
User avatar
tsgreen
 
Posts: 116
Joined: Thu Sep 29, 2016 4:03 pm
Location: Iowa
Model: 50 litres

Re: need to replace mesh filter

Unread postby PerzellBrewing » Wed Apr 11, 2018 5:27 pm

tsgreen wrote:Strange. If I remember correctly they contacted me fairly quickly. Have you looked for them on ebay? Maybe you can contact them through there.


Will give that another go and see if they will reach back out to me.
BM20 Owner in US
Twitter: @PerzellBrewing
FB: Perzell Brewing
Pinterest: PBrewing
Shop: TeePublic Storefront
User avatar
PerzellBrewing
 
Posts: 128
Joined: Wed Jan 14, 2015 2:26 pm
Location: Chattanooga, Tennessee, USA
Model: 20 litres

Re: need to replace mesh filter

Unread postby Mick Van » Wed Apr 11, 2018 7:39 pm

Hi,
Try to use this email, Steve answered me in a couple of hours

steve.hall@inoxia.co.uk>

Regards

Mick
Mick Van
 
Posts: 19
Joined: Fri Mar 10, 2017 5:51 pm
Model: 20 litres

Re: need to replace mesh filter

Unread postby PerzellBrewing » Mon Apr 16, 2018 6:58 pm

Mick Van wrote:Hi,
Try to use this email, Steve answered me in a couple of hours

steve.hall@inoxia.co.uk>

Regards

Mick


Was able to finally get a hold of him. They are doing some new eyelets in the center. I have attached the pics he provided me. I will update the thread once I receive mine with the new eyelets.

Here's a cross of old
traditional-eyelet.jpg


Here are shots of new eyelet
20180416_171706.jpg

20180416_171646.jpg

20180416_173026.jpg

20180416_172910.jpg
BM20 Owner in US
Twitter: @PerzellBrewing
FB: Perzell Brewing
Pinterest: PBrewing
Shop: TeePublic Storefront
User avatar
PerzellBrewing
 
Posts: 128
Joined: Wed Jan 14, 2015 2:26 pm
Location: Chattanooga, Tennessee, USA
Model: 20 litres

PreviousNext

Return to Modifications

Who is online

Users browsing this forum: No registered users and 2 guests