200L equipment profile for Beersmith

Because the 200 L and 500 L units are a different league, we'll grant them their own sub-forum.

200L equipment profile for Beersmith

Unread postby Miguel Teixeira » Sun Apr 06, 2014 1:58 pm

Anyone know the profile settings for beersmith? I'm using a Braumeister 200l. On the internet I've only found profile settings for the Braumeister 20l and 50l.
Can anyone help me? Can I use the profile from the Braumeister 50l and convert for 200l in BM?

Thanks, Miguel
Miguel Teixeira
 
Posts: 2
Joined: Sun Apr 06, 2014 1:52 pm
Model: 200 litres

Re: 200L equipament profile for Beersmith

Unread postby Dicko » Sun Apr 06, 2014 6:27 pm

Miguel Teixeira wrote:Anyone know the profile settings for beersmith? I'm using a Braumeister 200l. On the internet I've only found profile settings for the Braumeister 20l and 50l.
Can anyone help me? Can I use the profile from the Braumeister 50l and convert for 200l in BM?

Thanks, Miguel


Welcome Miguel

There is not many on here with the 200 litre model as fare as I know but you may contact your selling dealer and they may have other clients that they have sold the 200 to, and they may be able too help you.
Failing that you could do a run with just plain water to establish a "boil off" rate and you could allow the grain absorption figure the same as the BIAB setting in Beersmith as a close figure to start with.
The kettle losses at the end of the boil could be measured from the lowest point of the drain tap to the bottom of the kettle.
If you keep accurate records you will soon fine tune your equipment with accurate and repeatable figures.

On a side note, that is a big unit. Are you setting up a micro brewery??
That is a lot of beer to be drinking if it is for hobby use :drink: :drink: :D
The worst thing that can happen if I die is that my wife will sell all my brewing equipment for what I told her I paid for it
User avatar
Dicko
 
Posts: 1178
Joined: Tue Jan 21, 2014 8:25 pm
Location: Port Lincoln South Oz
Model: 20 litres

Re: 200L equipment profile for Beersmith

Unread postby Stefan » Fri Jun 13, 2014 7:42 am

Hi there guys,

I have also just started brewing on a 200L BM system. Any luck on a good Beersmith equipment profile to start with?

Cheers,
Stefan
Stefan
 
Posts: 6
Joined: Fri Jun 13, 2014 7:40 am
Model: 200 litres

Re: 200L equipment profile for Beersmith

Unread postby niels » Mon Jun 16, 2014 6:17 am

Stefan wrote:Hi there guys,

I have also just started brewing on a 200L BM system. Any luck on a good Beersmith equipment profile to start with?

Cheers,
Stefan

Hi Stefan,

There is no active member with a 200L system on the forum, but I hope you will stay around a bit.

Please feel free to show off your brewing set-up and report back if you've found a Beersmith profile.

- Niels
User avatar
niels
Site Admin
 
Posts: 1056
Joined: Mon Dec 02, 2013 8:08 pm
Location: Belgium
Model: 50 litres

Re: 200L equipment profile for Beersmith

Unread postby Stianherre » Fri Nov 21, 2014 12:12 pm

Hi,

Any luck having the beersmith equipment profile for 200 ltr? I would really epriciate having it if you suceeded getting it...

Cheers!
Stianherre
 
Posts: 1
Joined: Fri Nov 21, 2014 12:09 pm
Model: 200 litres

Re: 200L equipment profile for Beersmith

Unread postby Stefan » Fri Nov 21, 2014 6:54 pm

Hey,

I used a basic BIAB setup and simply scaled it up. After first brew I was able to put the correct efficiency in (65%) and that's about it. I only use it for recipe design and this gives me numbers close enough to what I need. Not ideal but does the job.

Stefan
Stefan
 
Posts: 6
Joined: Fri Jun 13, 2014 7:40 am
Model: 200 litres

Re: 200L equipment profile for Beersmith

Unread postby lunarjetset » Tue Sep 06, 2016 9:44 am

Following up on this thread - anyone got a profile to share yet? :)
lunarjetset
 
Posts: 10
Joined: Wed Apr 20, 2016 11:15 am

Re: 200L equipment profile for Beersmith

Unread postby JOSUEE » Mon Mar 13, 2017 9:32 pm

Hi from Mexico, does anyone have good news? I couldn't find the profile. Thanks
JOSUEE
 
Posts: 1
Joined: Thu Jan 19, 2017 7:13 pm
Model: 200 litres

Re: 200L equipment profile for Beersmith

Unread postby Miguel Teixeira » Tue Jun 27, 2017 4:32 pm

Stefan wrote:Hi there guys,

I have also just started brewing on a 200L BM system. Any luck on a good Beersmith equipment profile to start with?

Cheers,
Stefan


Do you already get de beersmith equipmenmt profile for the 200L?
Miguel Teixeira
 
Posts: 2
Joined: Sun Apr 06, 2014 1:52 pm
Model: 200 litres


Return to The Big Guys - BM200/BM500

Who is online

Users browsing this forum: No registered users and 1 guest