Micro Matic A type coupler with PRV

Any discussion about non-specific Braumeister brewing techniques can be discussed here. E.g. "How to make a starter?", "What's the best way to store my grains?", "Which pH meter do you recommend?", ...

Micro Matic A type coupler with PRV

Unread postby Crusty » Thu Nov 20, 2014 10:22 am

Hi guys.

I'm trying to track down a Micro Matic A type keg coupler with PRV on the side for dispensing commercial A type kegs.

Has anyone managed to track any down in Australia. I can probably source one from overseas but trying to find one locally if possible.

I'm after this one..............http://www.micromatic.com/draft-keg-bee ... H1501.html

Cheers
Crusty
 
Posts: 51
Joined: Wed Jan 22, 2014 4:00 am
Location: Yamba. NSW.
Model: 50 litres

Re: Micro Matic A type coupler with PRV

Unread postby niels » Thu Nov 20, 2014 11:15 am

Crusty, I have no experience with kegs whatsoever (except changing an empty one at the pub), but I was in a good mood and googled a bit for you.

I came across this: http://www.westbrew.com.au/showProduct/ ... e/W1900190
Except for the nipple it looks like it's the same type of coupler, no?

Or maybe these guys can help you out? http://www.bracton.com/equipment/draugh ... eg-tapping

- Niels
User avatar
niels
Site Admin
 
Posts: 1058
Joined: Mon Dec 02, 2013 8:08 pm
Location: Belgium
Model: 50 litres

Re: Micro Matic A type coupler with PRV

Unread postby Crusty » Fri Nov 21, 2014 2:00 am

Thanks niels.
The westbrew one has no prv so no good.
I've sent an email to Bracton two days ago but it seems they couldnt be bothered to reply to my email.
I think I'll just order directly from the USA.
Cheers
Crusty
 
Posts: 51
Joined: Wed Jan 22, 2014 4:00 am
Location: Yamba. NSW.
Model: 50 litres


Return to General Brewing Discussions

Who is online

Users browsing this forum: No registered users and 2 guests