Could anyone post a picture of the inside of the 50L

Are you considering the purchase of a Braumeister? Please enter and we'll convince you to bite the bullet!

Could anyone post a picture of the inside of the 50L

Unread postby Tommybear1979 » Mon Oct 13, 2014 11:34 am

Could anyone post a picture of the inside of a 50L braumeister?
Especially regarding the pump in/out-lets..

This because if/when i buy one id like to use this solution:
viewtopic.php?f=4&t=216

Best regards
Tom from The Hague the Netherlands
Tommybear1979
 
Posts: 41
Joined: Tue Sep 30, 2014 7:46 pm

Re: Could anyone post a picture of the inside of the 50L

Unread postby niels » Thu Oct 16, 2014 7:02 am

It's not my picture, but I can confirm this is a legit inside picture of a Braumeister 50l ;)

Braumeister 50l inside.jpg

Source: http://hbd.org/discus/messages/366/4932 ... 1280393488

- Niels
You do not have the required permissions to view the files attached to this post.
User avatar
niels
Site Admin
 
Posts: 1058
Joined: Mon Dec 02, 2013 8:08 pm
Location: Belgium
Model: 50 litres

Re: Could anyone post a picture of the inside of the 50L

Unread postby Tommybear1979 » Thu Oct 16, 2014 11:08 am

Thank you. I see that the two inlets are underneath the outer heating element. I hoped i could stick a filter/pipe in as seems possible with the 20L version
Tommybear1979
 
Posts: 41
Joined: Tue Sep 30, 2014 7:46 pm

Re: Could anyone post a picture of the inside of the 50L

Unread postby malzrohr » Thu Oct 16, 2014 5:25 pm

When I compare with my BM 20 the inlet is in more or less the same position: under the heating coil.
Es ist zwar ein sehr gutes Bier, die Goslarische Gose; doch wenn man meint, sie sey im Bauch, so liegt sie in der Hose.
malzrohr
 
Posts: 137
Joined: Wed Aug 13, 2014 12:22 pm
Location: Netherlands
Model: 20 litres

Re: Could anyone post a picture of the inside of the 50L

Unread postby Tommybear1979 » Thu Oct 16, 2014 8:19 pm

Ok. Also ran into the other topic on using the internal pump to pump the wort out. Seems it makes little difference in that matter whether i choose the 20L or the 50L one.
Does anyone know the inside diameter of the in- and outlets?
Would you think it is do able to bend a tube in such way that you could poke it in the inlet underneath the heat element when the BM is filled with wort (just before boil)?
Tommybear1979
 
Posts: 41
Joined: Tue Sep 30, 2014 7:46 pm


Return to Potentials owners

Who is online

Users browsing this forum: Bing [Bot] and 2 guests